The FM Direct Feed is a compact sand plant that works on the principle that a dry prescreened feed is delivered to the wash box equipped with a high pressure spray bar to pre-soak the feed before being delivered to the screen.
It has been introduced for applications where the percentage of oversize in the feed material is minimum.
Features & benefits
- Underflow rubber lined slurry pump
- One rubber lined hydrocyclone which classifies at approximately 75μm (200 mesh)
- Self regulating cyclone tank complete with built in float system
- High frequency 14 x 6 (4.3M x 1.8M) dewatering screen fitted with polyurethane modular mats
- Maximum recovery of material above 75μm (200 mesh)
- Removes silt, slimes and clays below 75μm (200 mesh)
- Removes water following dewatering operation to 15% of residual water content
- Major reduction in saleable material discharging to the pond, thus reducing pond maintenance and saving money
- Heavy-duty robust construction ideal for rugged operating environment
- Low maintenance
- All wear areas rubber lined
- Walkway and access steps
- Quick assembly time
- Breaks down into one 40′ (12m) container
- Approx 80-120 tph
Options
- Electrical control panel
FM 200 DF
| WORKING LENGTH | 7.3m (24′) |
| WORKING WIDTH (INC WALKWAY) | 4.3m (14′ 3″) |
| WORKING HEIGHT | 7.4m (24′ 2″) |
| FEED HEIGHT | 4m (13′) |
| PRODUCT DISCHARGE HEIGHT | 1.8m (5′ 10″) |
| WASTE WATER DISCHARGE HEIGHT | 0.6m (2′) |
| TOTAL WEIGHT (EMPTY) | 15000kg (33069lb) |
| TOTAL WEIGHT (WORKING) | 23000kg (50706lb) |




