It brings together on one chassis, centrifugal slurry pump, four hydrocyclones, a collection tank and a 12 x 5 or 14 x 6 dewatering screen. It can produce one grade of sand classifying at approximately 40 micron and is designed to work in conjunction with the Terex Washing range.
Features & benefits
- Maximum recovery of material above 40μm (400 mesh)
- Removes silt, slimes and clays below 40μm (400 mesh)
- Removes water following dewatering operation to 10-15% of residual water content
- Major reduction in fine material discharging to the water management system, thus reducing recovery cycle and saving money
- Heavy-duty robust construction ideal for rugged operating environment
- Low maintenance
- All wear areas rubber lined
- Walkway and access steps
- Quick assembly time
- Centrifugal slurry pump
- High frequency 12 x 4 or 14 x 6 dewatering screen fitted with polyurethane modular mats
- Four rubber lined G4 Hydrocyclones which classifies at approximately 40μm (400 mesh) (Depending on feed gradation)
- Self-regulating cyclone tank complete with built in float system
Options
- Boiler box for dry feed
- Electrical control panel
- Spraybars on dewatering screens
FM 120 BW STATIC
| WORKING LENGTH | 7.80m (22′ 6″) |
| WORKING WIDTH (INC WALKWAY) | 4.4m (14′ 4″) |
| WORKING HEIGHT | 5.35m (17′ 5″) |
| FEED HEIGHT | 2.30m (7′ 5″) |
| PRODUCT DISCHARGE | 1.26m (4′ 2″) |
| WASTE WATER DISCHARGE | 0.81m (2′ 9″) |
| TOTAL WEIGHT (EMPTY) | 15000kg (33000lb) |
| TOTAL WEIGHT (WORKING) | 22800kg (50000lb) |
FM 200 SUPERFINES
| WEIGHT | 18.500kg (40.700lbs) |
| WORKING WIDTH (INC WALKWAY) | 4.6m (15′ 1″) |
| WORKING LENGTH | 8.6m (28′ 2″) |
| WORKING HEIGHT | 7.3m (24′) |
| FEED HEIGHT | 3.1m (10′ 2″) |
| PRODUCT DISCHARGE | 1.70m (5′ 5″) |
| WASTE WATER DISCHARGE | 1.15m (3′ 10″) |